Scope of application: PE, SBS, TPE, PU, ​​EVA, etc.

Principle of pelletizing:

The polymer melt is extruded from the die hole and cut by a high-speed rotating cutter. The cut particles are cooled to a high-speed water injection to form a cylindrical water ring for cooling and setting, and then sent to the separator to separate the water. And particles. Since the machine head is in direct contact with water, insulation measures must be taken. In order to prevent the wear of the cutter and the template, the surface hardness of the template is relatively high.

The shape of the particles may be cylindrical, round or spherical, the length is determined by the rotational speed of the cutter, and the diameter is determined by the discharge orifice.

This device is especially suitable for processing plastics such as LDPE, HDPE, PP, PS, ABS, PC.

typical application:

Filling modification

PE, EVA, etc. + calcium carbonate, talc, titanium dioxide, carbon black, etc.

Cable material

LDPE, HDPE, LLDPE, MDPE sheathing material, insulating material; radiation crosslinking material, optical cable coating material, heat shrinkable tube material, etc.

Tube material

PPR pipe material, PE cross-linked pipe material

Elastomer

Thermoplastic elastomers such as TPR and TPU, EVA and hot melt adhesives, etc.

Masterbatch

PE, ABS, PS, EVA, etc.

Flame retardant masterbatch

ABS, EVA, etc.

Filling degradation masterbatch

PE, PP, PS, etc.

advantage:

1. Since the plastic is solidified by being scraped off by the blade and cooled by the circulating water in the melt state, the polymer of different viscosities can be used in the form of dicing, and the cutting does not form any dust and dicing in the melt state. Shape, regular packaging, transportation, etc. are very convenient.

2. According to the amount of extrusion, the size of the pellets can be changed by automatically matching the discharge amount of the die and the pelletizing speed. The pellet size and shape can also be changed manually.

3. The combination of pelletizing and cooling eliminates the 4-6mm long cold water tank and greatly reduces the floor space.

4. Easy to operate and low noise and good slicing quality.

Scope of application: PE, SBS, TPE, PU, ​​EVA, etc.

Principle of pelletizing:

The polymer melt is extruded from the die hole and cut by a high-speed rotating cutter. The cut particles are cooled to a high-speed water injection to form a cylindrical water ring for cooling and setting, and then sent to the separator to separate the water. And particles. Since the machine head is in direct contact with water, insulation measures must be taken. In order to prevent the wear of the cutter and the template, the surface hardness of the template is relatively high.

The shape of the particles may be cylindrical, round or spherical, the length is determined by the rotational speed of the cutter, and the diameter is determined by the discharge orifice.

This device is especially suitable for processing plastics such as LDPE, HDPE, PP, PS, ABS, PC.

typical application:

Filling modification

PE, EVA, etc. + calcium carbonate, talc, titanium dioxide, carbon black, etc.

Cable material

LDPE, HDPE, LLDPE, MDPE sheathing material, insulating material; radiation crosslinking material, optical cable coating material, heat shrinkable tube material, etc.

Tube material

PPR pipe material, PE cross-linked pipe material

Elastomer

Thermoplastic elastomers such as TPR and TPU, EVA and hot melt adhesives, etc.

Masterbatch

PE, ABS, PS, EVA, etc.

Flame retardant masterbatch

ABS, EVA, etc.

Filling degradation masterbatch

PE, PP, PS, etc.

advantage:

1. Since the plastic is solidified by being scraped off by the blade and cooled by the circulating water in the melt state, the polymer of different viscosities can be used in the form of dicing, and the cutting does not form any dust and dicing in the melt state. Shape, regular packaging, transportation, etc. are very convenient.

2. According to the amount of extrusion, the size of the pellets can be changed by automatically matching the discharge amount of the die and the pelletizing speed. The pellet size and shape can also be changed manually.

3. The combination of pelletizing and cooling eliminates the 4-6mm long cold water tank and greatly reduces the floor space.

4. Easy to operate and low noise and good slicing quality.